Custom Jewelry Designs - Page 2 Custom Jewelry Designs - Page1

Paradise Jewelry Home Page

Search This Site!

Check out the Super Deals Page - 50% off & Dropping!

We make special designs to please our customers or we re-design their old jewelry.  Sometimes jewelry is worn out or has gone out of style.  Sometimes jewelry is inherited and doesn't fit the personality of its new owner.  We can make it new and exciting and with much less cost than starting from scratch.  You can also see our Exclusive Paradise Jewelry Designs
Here are just a few of the pieces we have designed specially for our customers:       

3.22 ct Emerald cut Peridot in 14k yellow gold pendant Designed by Tim Thompson	1 carat total weight Bypass Ring from what used to be a 3-stone ring Designed by Tim Thompson	23.40 ct Lapis Lazuli  16 by 25 mm pear shape in 14ky Designed by Tim Thompson
Geometric Design with two Aquamarines  (7 by 10 mm and 8 by 11 mm) and two Diamonds (.04ct total weight)  in 14k white gold.	We designed this ring for her oval and two round diamonds - simple and elegant!	Here is a side view showing the "Barry Shank" that we like to use.  This gives some extra weight to the bottom of the ring, thus preventing it from spinning on the finger.
She wanted us to make earrings  to match this ring.	These earrings are the result!	3.76 ct Green Tourmaline (9 by 11 mm oval) on a 14k gold Slide - Elegant! She tells me she gets compliments on this everywhere she goes!
These diamonds were in two rings before and now they're in one elegant setting!	Her husband had this very unusual Opal and we made it into this pendant for her.	7mm Ruby with  .36ct Diamond in Bypass Ring
We removed the smaller diamond, put a larger head, and set the sparkler in it's place.	We designed this ring to accommodate her diamonds.  A large Pear and six smaller rounds in 14k yellow gold - one of a kind!	Approximately 2/3 ct of Diamonds and two 5mm triangle Sapphires on 14ky band
We set her two diamonds on this elegant slide.	8mm Portuguese Cut Tashmarine in 14ky gold	Side view
"Swans" 8.68 ct Carved Boulder Opal Doublet 14 by 21 mm pear set in 14ky slide	Diamond shaped Onyx and oval Opal These were carved by our customer and we designed this slide to show them off	Star of David in the wedding band with a.03ct diamond in the bail, and engraving between the points of the star
She didn't like this ring and wanted something more classic.	So we designed this ring.  Here's the carved wax. Click here to see the stages of the process	Here's the finished ring. 2.07 ct center Diamond  & .43 ct total weight of baguettes
This was designed special to be her 50th anniversary present (Modeled after Ulu Burun 1400 BC) Her wedding ring is incorporated  into the back of the piece.	"N" Initial ring with 14  .03ct Diamonds  (.42ctw) 14k yellow gold with 14k white gold top	This cross was the last gift her father gave her mother.  The wedding ring was her father's.  Now she can wear them together!
14k white & yellow Gold Pave' Ring 1.95 ct total weight of Diamonds These diamonds were in two men's rings and we designed this ring from those.  Excellent designing and craftsmanship by Tim Thompson!	This was a watch that never got worn, so we converted it to fantastic Sapphire bracelet!	This Mexican Jelly Opal was brought to me as a piece of rough.  We didn't think it would cut into much, but I was able to bring out a very nice opal.  We then designed this ring to present it at its best.  Unique!
Large Diamond on Cathedral band	Nugget Ring with large emerald cut Amethyst Made with anti-spin "Barry" shank	Ammolite Pendant in 14k white gold
14k white gold   Six.15 ct Diamonds  in Custom Band One 1.06 ct Diamond, two .18 ct Diamonds, and four .07 ct Baguettes	Here are the two rings together - stunning!	Design Drawing and Carved Wax for this gorgeous Purple Jade, and the raw casting
Black Crystal Opal, Boulder Opal and bead necklace	1.15 ct Center Diamond and six .02 ct accent Diamonds all bezel set	14.30 ct oval Blue Star Sapphire in basket weave ring
.90 ct of Diamonds channel set with a "Barry" shank to prevent spinning 14ky custom made from her old jewelry	Hearts with dangle Diamonds   .24 ct total weight in 14ky	4.13 ct Cushion cut Tourmaline One-of-a-Kind ring Custom carved and cast to fit her gemstone 2 colors of 14k gold Note the "Barry Shank" to prevent spinning - very comfortable!
1/2 ct Princess Cut Diamond and .28 ct of Sapphires (3 mm each) 18k gold  Custom made from scratch	This bracelet needed to be shortened so we made the pendant in the next picture from the extra link	6mm round London Blue Topaz pendant in 14ky made from a link out of the bracelet to the left.
1.20 ct round Diamond in customer designed 14ky gold man's ring	The challenge was to duplicate this gorgeous airboat in gold.	Ta-daaa!  And the propeller even spins!
14ky gold Airboat	The propeller even spins!	.62 ct round brilliant cut Diamond in 18ky Slide  1" tall Customer wanted her gold and Diamond made into a slide.
14ky with  5.21 ct Black Star Sapphire Notice that it makes the initials DM		Submariner's Emblem in his Wedding Band The perfect remembrance!
10.41 ct Opal Doublet and .70 ct Pink Sapphire Custom designed Pendant in 14k gold	I took a ring like the one on the left, and added front and back "walls" to make a whole new ring, and the settings are protected getting bumped!	Criss Cross Slide with bezel set Blue Topaz - very elegant! 14ky   $386   369-10039
This ring was no longer worn - way too big and clunky for her. So... it needed to become a pendant.	Here's the slide we made from that ring!	The diamonds at the top are earrings, and the rest are the earring jackets - awesome!
She had two extra diamonds from an old ring, so we added them to her pendant - Voila! Gorgeous!	The piece on the right was a cufflink.  My customer wanted it made into a ring.  I made the pieces for it and then assembled them.  See next picture.	And here's the finished piece - Gorgeous!
This Rhodochrosite needs to be trimmed a bit and then made into a pendant	We decided to hang it the other way. Here it is after trimming and framing.
She didn't like these jackets, so we re-designed them into a pendant	I cut off the tops, took a piece of stock to make into the top bridge, added a snapover bail and.... (Sorry for the blurry picture - heh!)	VOILA!  A Gorgeous & Stylish Pendant!

Ordering    Disclosure
Interest Free Layaway Plan
Return To Main Menu
Paradise Jewelry
The Friendliest Store In The World!
5455 Airport Rd. North
Naples, FL 34109
Toll Free 877-591-2645
Copyright 2000, 2001, 2002
E-mail me at