Custom Jewelry Designs Paradise Jewelry Home Page Search This Site! Check out the Super Deals Page - 50% off & Dropping!

We make special designs to please our customers or we re-design their old jewelry.  Sometimes jewelry is worn out or has gone out of style.  Sometimes jewelry is inherited and doesn't fit the personality of its new owner.  We can make it new and exciting and with much less cost than starting from scratch.  You can also see our Exclusive Paradise Jewelry Designs
Here are just a few of the pieces we have designed specially for our customers:       

We mounted this neat fossil Shark's Tooth that our customer found

These Diamonds needed a more exciting presentation, so we made this slide.

This Opal is truly 
amazing in person


Diamond & Peridot Bypass Ring

This had been an 
engagement ring


Diamond Star Ring


Princess cut Diamond

This wedding set can now be worn to preserve the memories!

This was a worn out tennis bracelet.  Now it's an elegant (and secure) bangle!

These diamonds were left over from our customers old jewelry.  Now they're a new pendant!

Lapis Lazuli inlaid into Sterling Ring
(Lapis cut and ring made from scratch)

3 ct Diamond with Diamond Risers

 

This is an engagement ring mounted on a wide band.  The old ring was worn out - now it is gorgeous and sturdy too.

Another Fossil Shark Tooth 
capped in a nugget style 

"Old" Diamonds on a new Saddle Band 
- Very Elegant!

These earrings were 
re-designed from a ring

See the Casting Page for 
another picture of this ring.

Another customer's Shark Tooth.  
This fossil is millions of years old!

A real Meteor from outer space!

Another real Meteor - what a gift!

These diamonds were in an old watch.  We designed this so our client could enjoy 
them again - Dazzling!  Kudos to 
Dave Kessner for the great pave' work!

Got some things you want redesigned?  Diamonds or Gems 
you want reset?  Give us a call 
Toll free: 877-591-2645

This was the customer's Garnet and we made it into an elegant slide

We mounted her Pearl and two Diamonds.

Authentic Florida Penn Shells have a brilliant black pearl look, but it doesn't show up in this picture!

This spiral design is EXACTLY what she's always wanted!

These Rubies and Diamonds were in some little anniversary style bands.  Now they're 
together in a beautiful double channel!

This elegant pear shaped 
Diamond was in a ring, now 
it's a gorgeous slide.

This was a ring and now it's an 
elegant slide for an Omega

This is a custom design from 
scratch for her Diamonds

We designed this antique looking ring around her Amethyst

Our customer had this gorgeous band and wanted a ring guard to match

Here are the two rings together 
- a perfect match!

Barry cut this opal especially to make this pendant 
matching one she lost.  14ky 
7.80 ct Opal and 5 diamonds

This copyrighted design is the 
Dove Hand of Martial Arts

This was her husbands wedding band until we converted it into a romantic pendant for her!

Customer's Tsavorite Garnet and baguette Diamonds in an 18k and Platinum ring. Completely hand engraved.  Super Detail! One-Of-A-Kind!

This elegant creation is from scratch.  These lovely gems were in two 
old rings and needed to be given 
this excellent flair!  14k white gold.

Our exclusive 4 Poster Ring made to hold the customer's gorgeous round Diamond.  14ky

1)  8.15ct Emerald cut Sapphire with four .05 ct Diamonds

2)  This ring had an oval Amethyst in it and we converted it for this amazing Sapphire!

This Citrine was in a large ring that the customer was uncomfortable with.  Now it's a one-of-a-kind pendant!

We made this guard ring to fit her engagement ring and we set her diamonds from an old ring

Here is a picture of the two rings together

We made this cross from a bracelet and the hinges still let it move!


Classic 3 Diamond Ring in Platinum
1.02 ct oval in the center with .91ct total weight on the sides.


Now she can go on wearing their Wedding Rings as a pendant


We reset her Diamond in our design


These Charms were rings that she 
didn't wear any more!


3 Tourmaline Slides - she can wear one or all 3


We designed this ring and set her Diamonds in it - she loves it!


We turned her Diamond Ring into an 
Elegant new Slide


Her Emerald set in our Bypass design


Computer designed ring


Computer designed ring

We set her Opal into this 
pendant with 2 Diamonds 
and one Cultured Pearl

Custom band for a Black Star Sapphire (I can't get the Star to
 show for the picture)

We set the customer's 4 ct Diamond on our Saddle Ring design

One-Of-A-Kind Diamond 
Slide for her Omega

We put this Flawless Princess cut into this Platinum & 18k Gold setting.  It is completely hand engraved.  She calls it her 
"Cinderella Ring"

Long Green Tourmalines & Diamonds
One-Of-A-kind!

Blue Topaz and Cultured Pearl Slide - isn't this elegant? Her Diamonds look great 
mounted in this new ring! 		This used to be her Opal ring!
Platinum & Gold 
3 rows of Princess cut Diamonds 		14ky gold with 2 Tsavorite Garnets (1.39ctw) and  .40ct  of Diamonds Here is the Pendant Jacket with the Diamond Pendant installed - Unique!
"Vine" style slide with 3.72ct Tourmaline, .20ct Tsavorite Garnet, and .26ct Alexandrite in 18k gold 1" wide Nugget pendant  with 4.5 mm Diamond.  Made with his Gold & Diamond. Her multi-band ring was worn out so we mounted it on a wide flat band.  Her Diamond is in a new platinum head for more security.
Blue Topaz and Diamonds Bypass Bracelet in 14k white gold made with her diamonds (made to go with the matching ring in the next picture). 1/4 ct center with 6 .03ct side Diamonds in a 14k white gold 
bypass. Her Diamonds were 
in an old pendant before.
14k custom design with 7 marquise cuts and 16 rounds Side view of same ring Our crescent design with her diamonds
-so elegant!
Memories of her husband in a stylish new ring! Elegant Slide in 14k yellow gold!
The slide is $575 plus gemstones and setting 		We made this signet from scratch and added it to the anchor she supplied
Emeralds, Sapphire and Inlaid Opals  14k white gold 4.44 ct oval Peridot with .12 ct of diamonds.
I set her gemstone in one 
of my designs - a stunner! 		Swooping Arc Earrings  14k yellow gold and 16 of her diamonds  .80ct total weight
Custom Design Anniversary present
His wife's nickname is Peach!
18k yellow gold 
and 1.77ct Diamond 		Do you prefer it with or without the "green" leaves? 18k white gold Oriental Symbol 
pendant 1 1/2" across.  
This was carved and then cast
3.22 ct Emerald cut Peridot in 14k yellow gold pendant
Designed by Tim Thompson 		1 carat total weight Bypass Ring from what used to be a 3-stone ring
Designed by Tim Thompson 		23.40 ct Lapis Lazuli 
16 by 25 mm pear shape in 14ky
Designed by Tim Thompson
Geometric Design with two Aquamarines 
(7 by 10 mm and 8 by 11 mm)
and two Diamonds (.04ct total weight) 
in 14k white gold. 		We designed this ring for her oval and two round diamonds - simple and elegant! Here is a side view showing the "Barry Shank" that we like to use.  This gives some extra weight to the bottom of the ring, thus preventing it from spinning on the finger.
She wanted us to make earrings 
to match this ring. 		These earrings are the result! 3.76 ct Green Tourmaline (9 by 11 mm oval) on a 14k gold Slide - Elegant!
She tells me she gets compliments on this everywhere she goes!
These diamonds were in two rings before and now they're in one elegant setting! Her husband had this very unusual Opal and
we made it into this pendant for her. 		7mm Ruby with 
.36ct Diamond in Bypass Ring
We removed the smaller diamond, put a larger head, and set the sparkler in it's place. We designed this ring to accommodate her diamonds.  A large Pear and six smaller rounds in 14k yellow gold - one of a kind! Approximately 2/3 ct of Diamonds and two 5mm triangle Sapphires on 14ky band
We set her two diamonds on this elegant slide. 8mm Portuguese Cut Tashmarine
in 14ky gold 		Side view
"Swans"
8.68 ct Carved Boulder Opal Doublet
14 by 21 mm pear set in 14ky slide 		Diamond shaped Onyx and oval Opal
These were carved by our customer and we designed this slide to show them off 		Star of David in the wedding band with a.03ct diamond in the bail, and engraving between the points of the star
She didn't like this ring and wanted something more classic. So we designed this ring.  Here's the carved wax.
Click here to see the stages of the process 		Here's the finished ring.
2.07 ct center Diamond 
& .43 ct total weight of baguettes
 
This was designed special to be her 50th anniversary present (Modeled after Ulu Burun 1400 BC) Her wedding ring is
incorporated  into the back of the piece. 		"N" Initial ring with 14  .03ct Diamonds  (.42ctw)
14k yellow gold with 14k white gold top		 This cross was the last gift her father gave her mother.  The wedding ring was her father's.  Now she can wear them together!
14k white & yellow Gold Pave' Ring
1.95 ct total weight of Diamonds
These diamonds were in two men's rings and we designed this ring from those.  Excellent designing and craftsmanship by Tim Thompson!		 This was a watch that never got worn, so we converted it to fantastic Sapphire bracelet! This Mexican Jelly Opal was brought to me as a piece of rough.  We didn't think it would cut into much, but I was able to bring out a very nice opal.  We then designed this ring to present it at its best.  Unique!
Large Diamond on Cathedral band Nugget Ring with large emerald cut Amethyst
Made with anti-spin "Barry" shank		 Ammolite Pendant in 14k white gold
14k white gold   Six.15 ct Diamonds  in Custom Band
One 1.06 ct Diamond, two .18 ct Diamonds, and four .07 ct Baguettes		 Here are the two rings together - stunning! Design Drawing and Carved Wax for this gorgeous Purple Jade, and the raw casting
Black Crystal Opal, Boulder Opal and bead necklace 1.15 ct Center Diamond and six .02 ct accent Diamonds all bezel set 14.30 ct oval Blue Star Sapphire in basket weave ring
.90 ct of Diamonds channel set with a "Barry" shank to prevent spinning
14ky custom made from her old jewelry		 Hearts with dangle Diamonds   .24 ct total weight in 14ky 4.13 ct Cushion cut Tourmaline
One-of-a-Kind ring Custom carved and cast to fit her gemstone
2 colors of 14k gold
Note the "Barry Shank" to prevent spinning - very comfortable!
1/2 ct Princess Cut Diamond and .28 ct of Sapphires (3 mm each)
18k gold  Custom made from scratch		 This bracelet needed to be shortened so we made the pendant in the next picture from the extra link 6mm round London Blue Topaz pendant in 14ky made
from a link out of the bracelet to the left.
1.20 ct round Diamond in customer designed 14ky gold man's ring  The challenge was to duplicate this gorgeous airboat in gold. Ta-daaa!  And the propeller even spins!
14ky gold Airboat The propeller even spins! .62 ct round brilliant cut Diamond in 18ky Slide  1" tall
Customer wanted her gold and Diamond made into a slide.
14ky with  5.21 ct Black Star Sapphire
Notice that it makes the initials DM		   Submariner's Emblem in his Wedding Band
The perfect remembrance!
 
10.41 ct Opal Doublet and .70 ct Pink Sapphire
Custom designed Pendant in 14k gold		 I took a ring like the one on the left, and added front and back "walls" to make a whole new ring, and the settings are protected getting bumped! Criss Cross Slide with bezel set Blue Topaz - very elegant!
14ky   $386   369-10039
This ring was no longer worn - way too big and clunky for her.
So... it needed to become a pendant.		 Here's the slide we made from that ring! The diamonds at the top are earrings, and the rest are the earring jackets - awesome!
She had two extra diamonds from an old ring, so we added them to her pendant - Voila! Gorgeous! The piece on the right was a cufflink.  My customer wanted it made into a ring.  I made the pieces for it and then assembled them.  See next picture. And here's the finished piece - Gorgeous!
   
This Rhodochrosite needs to be trimmed a
bit and then made into a pendant		 We decided to hang it the other way.
Here it is after trimming and framing.		  

Ordering    Disclosure
Interest Free Layaway Plan
Return To Main Menu
Paradise Jewelry
The Friendliest Store In The World!
5455 Airport Rd. North
Naples, FL 34109
Toll Free 877-591-2645
Copyright 2000, 2001, 2002
E-mail me at